Key takeaways
- Compare the best drill bit sets for wood, metal and plastic, with titanium, cobalt and black oxide picks, size ranges, shank types and cases explained.
A good drill bit set saves you from a common workshop frustration: reaching for a size you do not own, or forcing a dull bit through material it was never made to cut. The best sets match bit material and point style to your work, cover the sizes you reach for most, and keep everything in a case you can read at a glance. A homeowner hanging shelves needs something different from a remodeler drilling steel brackets all week, and both differ from a woodworker who wants clean holes in hardwood.
This guide compares five sets from five different makers, each built around a distinct idea: a titanium pilot point set for everyday drilling, a full cobalt index for hard metal, a large mixed drilling and driving kit, a compact impact-ready titanium set, and a hex shank titanium set that moves between a drill and an impact driver. A buying section after the picks explains coatings, point angles, shank styles and size coverage so you can judge any set on the shelf.
Disclosure: As an Amazon Associate, I earn from qualifying purchases.
1. DEWALT DW1361 Titanium Pilot Point Set, 21-Piece
This is the set to pick if most of your drilling is the everyday mix of pine, plywood, plastic and mild steel around the house. The bits carry a titanium nitride coating over high-speed steel, which reduces friction at the cutting edge and helps the bits stay sharp longer than plain black oxide bits in the same work. The defining feature is the Pilot Point tip, which starts on contact and drills a small centering point before the full diameter engages. That design limits wandering on smooth surfaces, so holes land where you marked them without a center punch on most materials.
Size coverage runs from 1/16 inch up to 1/2 inch, and DEWALT doubles up on the five smallest sizes, which are the ones most likely to snap or get lost. Larger bits use a no-spin shank that grips firmly in the chuck, and the set rides in a tough case with clear size markings. For general home and light shop use, this balance is hard to beat.
Specs
- Brand: DEWALT
- Model: DW1361
- Piece count: 21
- Bit material: High-speed steel with titanium nitride coating
- Point style: Pilot Point
- Size range: 1/16 inch to 1/2 inch, with two each of the five smallest sizes
- Shank: No-spin shank on larger sizes
- Case: Plastic tough case with size markings
- Intended materials: Wood, metal and plastic
- ASIN: B004GIO0F8
2. IRWIN 3018002 Cobalt M35 Set, 29-Piece
When the work turns to stainless steel, cast iron and other hard metals, cobalt is the step up that matters, and this IRWIN index is built for exactly that. The bits are made from M35 cobalt alloy steel, which holds its hardness at the higher temperatures produced when drilling tough alloys. Plain high-speed steel softens and dulls quickly in that environment; cobalt keeps cutting, which is why machinists and fabricators reach for it despite the higher cost per bit.
The set is a true index: 29 bits covering 1/16 inch to 1/2 inch in 1/64 inch increments, so you always have the exact size for a tap drill chart or a close-fit bolt hole. A 135-degree split point helps each bit start without walking and reduces the thrust needed to keep it cutting. Everything stores in a metal index case. If your projects regularly involve hardened metal, this is the specialist pick in the group.
Specs
- Brand: IRWIN
- Model: 3018002
- Piece count: 29
- Bit material: M35 cobalt alloy steel
- Point style: 135-degree split point
- Size range: 1/16 inch to 1/2 inch in 1/64 inch increments
- Case: Metal index case
- Intended materials: Stainless steel, cast iron, titanium and light-gauge metal
- ASIN: B000BO9JMK
3. Makita T-01725 Contractor-Grade Bit Set, 70-Piece
Some buyers do not want a bits-only index at all. They want one case that drills pilot holes, drives screws, turns nuts and bores flat-bottomed holes for hinges and latches. The Makita T-01725 is that kind of kit: a 70-piece contractor-grade assortment that combines twist drill bits, screwdriver bits, nut drivers and spade bits, plus a magnetic bit holder, in a single carry case.
The components use 1/4 inch hex shanks in Makita’s Ultra-Lok style, so pieces swap quickly between a drill and an impact driver. That suits flat-pack furniture, deck repairs and appliance installs, where drilling and fastening alternate every few minutes. You give up the fine 1/64 inch steps of a dedicated metal index, but you gain a single kit that covers most of a typical home project list.
Specs
- Brand: Makita
- Model: T-01725
- Piece count: 70
- Contents: Twist drill bits, screwdriver bits, nut drivers and spade bits
- Included accessory: Magnetic bit holder
- Shank: 1/4 inch hex, Ultra-Lok
- Case: Carry case
- Intended use: Drilling, driving and fastening with a drill or impact driver
- ASIN: B000UZ0VTU
4. Bosch TI9IM Impact Tough Titanium Set, 9-Piece
Not every job needs thirty sizes. For apartment living, a small toolbox, or a go-bag for quick repairs, the Bosch TI9IM packs nine titanium nitride coated bits into a compact case that covers the diameters most small jobs actually use, from 1/16 inch to 3/8 inch. The bits are built to the Impact Tough standard, with a hex shank that locks into impact drivers as well as standard chucks, so one small set serves both tools.
Bosch gives these bits a no-skate tip for accurate starts, long flutes that clear chips effectively, and laser markings so each diameter stays easy to read. The titanium coating reduces friction and extends edge life in heavy-gauge carbon steel, light-gauge metal and hardwood. As a compact, durable starter or companion set, it earns its place here on focus rather than size count.
Specs
- Brand: Bosch
- Model: TI9IM
- Piece count: 9
- Bit material: Heat-treated carbon steel with titanium nitride coating
- Point style: No-skate tip
- Sizes included: 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 inch
- Shank: Impact-ready hex shank
- Markings: Laser-marked diameters
- Intended materials: Heavy-gauge carbon steel, light-gauge metal and hardwood
- ASIN: B01H0NV5GM
5. CRAFTSMAN CMAM3211 Titanium Set, 21-Piece
The CRAFTSMAN CMAM3211 splits the difference between a pure drill index and a mixed kit. Inside the 21-piece case are 14 hex shank titanium nitride coated drill bits plus a selection of screwdriver bits, so the set handles a pilot hole and the screw that follows it without a case swap. The drill bits use a 135-degree split point, a geometry that starts cleanly and is a sensible match for metal, plastic and wood.
The 1/4 inch hex shanks fit quick-change chucks and impact drivers, and the spiral flutes clear chips in the usual household materials. The titanium nitride finish adds wear and corrosion resistance over plain steel. For a first serious set, or a second set that lives in the garage, this is a practical, well-rounded choice.
Specs
- Brand: CRAFTSMAN
- Model: CMAM3211
- Piece count: 21
- Contents: 14 hex shank titanium drill bits plus screwdriver bits
- Bit material: Alloy steel with titanium nitride finish
- Point style: 135-degree split point
- Flute type: Spiral
- Shank: 1/4 inch hex
- Intended materials: Metal, plastic and wood
- ASIN: B07QFSWCGY
How to Choose the Right Drill Bit Set
Start with material. For wood, plastic and soft metals, high-speed steel with a titanium nitride or black oxide coating covers nearly everything. For stainless steel, hardened fasteners and cast iron, move to cobalt alloy bits and accept the higher price as the cost of edges that survive the work. Carbide-tipped bits are the answer for masonry and tile, while brad point and spade bits give cleaner results in wood when appearance matters.
Next, look at point style. A standard 118-degree point is fine for soft material, while a 135-degree split point starts with less wandering and less pressure in metal. Pilot point and brad point designs add a small centering tip that improves accuracy in wood and sheet goods.
Shank style is the third decision. Round shanks belong in chucks and drill presses. Three-flat shanks resist spinning under load. Hex shanks snap into impact drivers and quick-change holders, which is convenient when you alternate between drilling and driving.
Finally, judge size coverage and the case. A 29-piece index in 1/64 inch steps suits metalwork and tapping; a 14 to 21-piece set with duplicates of the smallest sizes suits most home use better, because small bits break and spares matter more than rare sizes. Choose a case with size markings you can read in poor light, drill at the right speed for the diameter, use cutting oil on steel, and let the edge cut instead of forcing it.
Frequently Asked Questions
Which drill bit material is best for metal?
For mild steel and aluminum, titanium nitride coated high-speed steel works well. For stainless and other hard alloys, cobalt alloy bits hold their edge at higher heat and are the better choice.
Can one set drill both wood and metal?
Yes. General-purpose twist bit sets drill wood, plastic and metal with the same bits. For especially clean holes in fine wood, add brad point bits later; for masonry you will need a separate carbide-tipped set.
What size range should a home set cover?
A range from 1/16 inch to 1/2 inch covers most household work. Sets that include duplicates of the smallest sizes are practical, since thin bits are the easiest to break.
Do hex shank bits fit a normal drill?
Yes. A standard three-jaw chuck grips a 1/4 inch hex shank securely, and the same bits also snap into impact drivers and quick-change holders, which makes hex shank sets versatile.
Conclusion
The right set is the one matched to your material and your tools. Choose the DEWALT DW1361 for clean-starting everyday drilling, the IRWIN cobalt index for hard metal, the Makita 70-piece kit when one case must drill and drive, the Bosch TI9IM for a compact impact-ready option, and the CRAFTSMAN CMAM3211 for a balanced drill and drive set with hex shank convenience. Buy for the work you do most, keep the bits organized, and replace individual worn sizes as needed rather than replacing the whole case.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Collect the home and kitchen items you want in one registry that guests can shop from.
Create a wedding registrySet up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.
Explore Subscribe & SaveFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.




