Updated Nov 21, 2026· 8 min read

Key takeaways

  • Compare the best sandpaper by grit, abrasive and wet or dry use for wood, metal and paint, with five sheet packs that cover prep through fine finishing.

Sandpaper looks simple, but the wrong sheet can waste an afternoon. A coarse sheet on a finished tabletop leaves deep scratches that take several finer grits to remove. A fine sheet on thick old paint clogs in minutes and barely cuts. The best sandpaper matches the material, the stage of the job, and the way you sand.

Our top pick: 3M Wetordry Sandpaper Assorted Grits 220, 320, 400. Runner-up: Dura-Gold Premium Wet or Dry Assortment.

This guide explains grit, abrasive grain, backing, and sheet size, then compares five packs covering paint prep, wood smoothing, wet sanding between coats, and polishing on metal. Four picks are flat sheets you can cut or fold to fit your tool, and the fifth is a hook-and-loop disc set for a random orbital sander.

Disclosure: As an Amazon Associate, I earn from qualifying purchases.

How to Choose Sandpaper

Grit Number and Sanding Sequence

Grit describes the size of the abrasive particles. Lower numbers mean larger, more aggressive particles and higher numbers mean a smoother finish. For bare wood, a common path is 80 or 100 grit to level, 120 or 150 grit to remove the coarse scratches, then 180 or 220 grit before stain or paint. Skipping steps leaves visible scratches, because each grit mainly removes the marks left by the one before it.

For sanding between coats of varnish, lacquer, or paint, 220 to 400 grit is usually enough to scuff the surface so the next coat bonds. For metal polishing and automotive color sanding, work moves into wet sanding at 800 grit and above, sometimes reaching 3000 grit before polishing compounds.

Abrasive Grain: Aluminum Oxide vs Silicon Carbide

Aluminum oxide is the workhorse grain for wood, painted surfaces, and general metal work. It is tough, lasts well under hand pressure, and handles dry sanding without loading up too quickly, especially in open-coat sheets where grains are spaced to leave room for dust. It is the default for furniture, cabinets, and doors.

Silicon carbide is sharper and harder, and it is the grain in most waterproof wet-or-dry sheets. Used wet, it keeps cutting on hard finishes, fiberglass, and metal while water carries debris away. It wears faster on raw wood under heavy dry pressure, so many workshops keep aluminum oxide for shaping and silicon carbide for finishing and wet work.

Wet, Dry, or Both

Dry-only paper has a backing that softens when soaked, so keep it away from water. Wet-or-dry paper uses waterproof backing and resin bonds, which lets you sand with water. Wet sanding reduces dust, limits clogging, and produces the even scratch pattern needed before polishing. If you only buy one type for finish work, buy wet-or-dry sheets, because they also work well dry.

Sheet Size and Backing

The standard full sheet is 9 x 11 inches. Use it whole on a block, torn into halves or quarters for palm sanders, or folded for detail work. Smaller 9 x 3.6 inch strips suit hand sanding and narrow blocks. Heavier backing resists tearing in corners, while lighter backing flexes better on curves.

The 5 Best Sandpaper Packs

1. 3M Wetordry Sandpaper Assorted Grits 220, 320, 400 – Best for Sanding Between Coats

This 3M pack is built for the finishing stage, where control matters more than speed. The assortment covers 220, 320, and 400 grit, the exact window most people need for scuffing varnish, lacquer, and paint between coats and for smoothing primer. The silicon carbide grain sits on a waterproof backing, so you can sand wet to keep dust down on hard finishes, or dry for quick touch-ups.

At a full 9 x 11 inches, each sheet cuts down for a block or folds for hand work on moldings and edges. With five sheets, it is a finishing kit rather than a bulk supply, suiting occasional furniture refinishing and touch-up work.

Specs

  • Brand: 3M
  • Model: 9088DC-NA
  • ASIN: B001449TPS
  • Grits: 220, 320, 400 assorted
  • Abrasive: Silicon carbide
  • Sheet size: 9 x 11 inches
  • Count: 5 sheets
  • Use: Wet or dry

2. Dura-Gold Premium Wet or Dry Assortment – Best Wide Grit Range

The Dura-Gold assortment is the one-pack answer for a whole project. It holds 50 sheets across ten grits, from 150 for early smoothing through 3000 for near-polishing work, with five sheets of each grit. That spread lets you walk a painted panel, a metal part, or a clear-coated surface through a complete sequence without stopping to buy the next step.

The sheets measure 3-2/3 x 9 inches, the classic third-sheet format that fits many blocks and jitterbug sanders. The silicon carbide abrasive on waterproof paper suits wet color sanding and polishing as well as dry woodworking. For automotive touch-ups and any job that ends at a high shine, this pack covers more ground than any other pick here.

Specs

  • Brand: Dura-Gold
  • Model: DUR WD-VP3-50
  • ASIN: B07DTGP1QT
  • Grits: 150, 220, 320, 400, 600, 800, 1000, 1500, 2000, 3000
  • Abrasive: Silicon carbide
  • Sheet size: 3-2/3 x 9 inches
  • Count: 50 sheets, 5 per grit
  • Use: Wet or dry

3. HSYMQ Sand Paper Variety Pack 24 Sheets – Best Compact Assortment

The HSYMQ pack squeezes twelve grits into a small assortment: two sheets each from 120 up to 3000 grit. It is a smart starter kit for craft work, small furniture repairs, model finishing, and metal polishing, where you need many steps but only a little paper at each step.

Each sheet is 9 x 3.6 inches, a handy strip for hand sanding or wrapping around a small block. The silicon carbide grain and waterproof backing support wet sanding on the finer grits, and the top end reaches 2500 and 3000 grit for final smoothing before polishing. With two sheets per grit, it is an assortment for variety, not for large surfaces.

Specs

  • Brand: HSYMQ
  • Model: TOMPOL-1118-1915-11
  • ASIN: B07R64PZ8N
  • Grits: 120, 150, 180, 240, 320, 400, 600, 800, 1000, 1500, 2500, 3000
  • Abrasive: Silicon carbide
  • Sheet size: 9 x 3.6 inches
  • Count: 24 sheets, 2 per grit
  • Use: Wet or dry

4. Norton ProSand 220 Grit Sheets 20-Pack – Best Single-Grit Wood and Paint Prep

Sometimes the smartest buy is a full pack of the one grit you use most, and for prep work that grit is often 220. This Norton pack holds twenty 9 x 11 inch sheets of 220 grit aluminum oxide, the classic final prep step before paint, stain, or a clear finish on bare wood. A stearate coating resists loading, so the sheet keeps cutting longer on softwood, filler, and primer instead of glazing over with dust.

The full-size sheets tear or cut cleanly into halves and quarters for palm sanders. Because this is a dry-use sheet rather than a waterproof finishing sheet, pair it with a coarser pack for shaping and a wet-or-dry pack for between-coat sanding.

Specs

  • Brand: Norton
  • Model: 07660768167
  • ASIN: B07BLTD4TL
  • Grit: 220
  • Abrasive: Aluminum oxide
  • Sheet size: 9 x 11 inches
  • Count: 20 sheets
  • Use: Dry

5. WORKPRO 150-Piece Sanding Discs Set – Best Bulk Set for Orbital Sanders

The WORKPRO set is the bulk power-sanding pick: 150 hook-and-loop discs in ten grits, from 60 for stripping and shaping through 600 for a fine pre-finish surface. The count is weighted toward the coarse end, with twenty discs each at 60, 80, 100, and 120 grit, fifteen each at 150 and 180, and ten each at 240, 320, 400, and 600.

Each disc is 5 inches across with eight dust-extraction holes and an aluminum oxide grain that resists clogging on wood, metal, and painted surfaces. The hook-and-loop backing swaps in seconds on a 5-inch random orbital sander, making a full grit sequence far faster than cutting and clamping sheets. Buy it for larger flat surfaces, and keep a sheet pack for hand work, corners, and wet sanding.

Specs

  • Brand: WORKPRO
  • Model: W124095
  • ASIN: B07HHY6MKY
  • Grits: 60, 80, 100, 120, 150, 180, 240, 320, 400, 600
  • Abrasive: Aluminum oxide
  • Disc size: 5 inches, 8-hole
  • Count: 150 discs
  • Use: Dry, hook and loop orbital sander

How to Choose the Right Pack

Match the pack to the stage you repeat most. For bare wood and painted trim prep, start with the Norton 220 pack. For furniture refinishing and between-coat work, choose the 3M assortment. For a full sequence from prep to polish, the Dura-Gold pack covers every step, while the HSYMQ pack offers the same idea in a smaller count for crafts and repairs. The WORKPRO disc set is the pick when most of your sanding is done on a 5-inch random orbital sander and you want every grit on hand in bulk.

Also check format. Full 9 x 11 inch sheets are the most flexible because you cut them to fit. Third-sheet strips save cutting and fit many blocks directly. Hook-and-loop discs only fit the sander size they are made for, so confirm diameter and hole pattern first. Finally, plan the sequence, not just the starting grit, so you never skip a step.

FAQ

What grit should I start with on bare wood?
Start at 80 or 100 grit only if the surface is rough or needs shaping. For typical boards, 120 grit is a safer start, followed by 150 or 180, then 220 before finishing.

Can I use wet-or-dry sandpaper dry?
Yes. Wet-or-dry sheets work dry as well. The waterproof backing adds the option to sand wet, which helps on paint, clear coats, and metal.

What is the difference between aluminum oxide and silicon carbide?
Aluminum oxide lasts longer for dry sanding on wood and paint. Silicon carbide is sharper, is used in most waterproof sheets, and suits wet sanding.

How do I stop sandpaper clogging so fast?
Use the right grit for the stage, keep pressure light, and clear dust often. On paint and resinous wood, a stearate sheet or wet sanding extends sheet life.

How many grits do I need for a smooth finish?
Three steps are enough for most wood projects, such as 120, 180, and 220. Polished paint or metal needs more, up to 2000 or 3000 before polishing.

Conclusion

The best sandpaper is not a single product. It is a short sequence matched to your material. Keep an aluminum oxide sheet for dry prep, a wet-or-dry assortment for finishing, and a fine waterproof pack for polishing, and you can handle almost any surface in the house or garage. Among these five, the Dura-Gold assortment is the most complete purchase, the 3M pack is the most focused for between-coat work, and the Norton, HSYMQ, and WORKPRO packs fill the prep, craft, and bulk orbital roles.

T
The Dream Home Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Sandpaper for Wood, Metal and Paint Prep…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Wedding Registry

Collect the home and kitchen items you want in one registry that guests can shop from.

Create a wedding registry
Subscribe & Save

Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.

Explore Subscribe & Save
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.