Key takeaways
- Position 1 (roughly 120-130 degrees): a relaxed seated recline, good for watching TV or working on a laptop tray.
- Position 2 (roughly 145-155 degrees): a deeper lounge angle that starts lifting the legs level with the heart.
- Position 3, true zero gravity (roughly 170-175 degrees): the chair distributes your body weight evenly across the frame instead of concentrating it on the lower spine, which is the angle most useful for people managing back pain.
What's inside
The Real Relax Favor 06 is an SL-track zero-gravity massage chair built around full-body airbag compression, a heated lumbar zone, and a recline that pushes past 170 degrees, and it needs roughly 63 to 67 inches of reclined depth plus 4 to 6 inches of wall clearance to work in a real living room, not just a showroom. Whether it actually fits your space and your body depends on numbers most listings bury or leave out entirely, so here’s what to check before you buy.
As an Amazon Associate we earn from qualifying purchases at no extra cost to you.
What the SL-Track Actually Does Differently
Most budget massage chairs use an L-track, which only curves from the upper back down to the lower back before stopping. The Favor 06 uses an SL-track, meaning the rollers extend further down and follow the natural curve from the neck, through the lumbar, and into the upper glutes. That extra length matters more than it sounds like on paper: it’s the difference between a massage that stops at your tailbone and one that actually works into the hip and glute muscles, which is where a lot of people carry tension from sitting at a desk all day.
The trade-off is that SL-track mechanisms are longer and heavier than L-track ones, which is part of why the chair’s reclined footprint runs long. If you’ve used a Real Relax SS01 or a Real Relax MM350, both of which stick to L-track designs, you’ll notice the Favor 06’s roller path reaches noticeably further down the seat back before it needs to zero-gravity tilt the seat pan to keep working the glutes.
Zero-Gravity Recline Angles: What the Numbers Mean
“Zero gravity” gets used loosely across the massage chair market, so it’s worth being specific. The Favor 06 offers multiple preset recline positions, typically landing in these ranges:
- Position 1 (roughly 120-130 degrees): a relaxed seated recline, good for watching TV or working on a laptop tray.
- Position 2 (roughly 145-155 degrees): a deeper lounge angle that starts lifting the legs level with the heart.
- Position 3, true zero gravity (roughly 170-175 degrees): the chair distributes your body weight evenly across the frame instead of concentrating it on the lower spine, which is the angle most useful for people managing back pain.
For comparison, a Real Relax Deluxe or Real Relax zero gravity massage chair in the same general price tier usually tops out in a similar 170-degree range. The Favor 06 doesn’t go further than the category norm, but it hits that angle smoothly, without the jerky, two-stage recline some cheaper chairs use.
Airbag Zones and Heat Placement
The airbag layout is where a lot of the chair’s actual comfort comes from, separate from the roller massage. The Favor 06 typically includes airbags in these zones:
- Shoulders (compression, not rolling, for tight upper traps)
- Arms and forearms (full sleeve compression, useful after typing all day)
- Hips and outer thighs (side compression that some cheaper chairs skip entirely)
- Calves and feet (compression plus, on most units, a footrest that extends independently of the leg rest)
Heat is concentrated at the lumbar area, delivered through infrared panels rather than a heating pad, which warms up faster and stays consistent through a 15 to 30 minute session. It’s not a full-back heat zone, so if you specifically want heat across the shoulders too, that’s a feature to check on higher-tier Real Relax models before assuming this one has it.
Footprint and Wall Clearance: The Part Listings Skip
This is the number that actually determines whether the chair works in your room. Massage chairs with SL-track and zero-gravity mechanisms don’t recline in place the way a normal recliner does, some slide forward on rails as they tilt back, which changes how much wall clearance you need.
| Measurement | Approximate value | Why it matters |
|---|---|---|
| Upright footprint (W x D x H) | ~30 x 33 x 45 in | Space needed when not in use |
| Reclined depth (full zero gravity) | ~63-67 in | Total floor length the chair occupies when fully reclined |
| Wall clearance needed | ~4-6 in | Some models slide forward on recline, reducing how close it can sit to a wall |
| Doorway width for delivery | at least 28-30 in | Chair usually ships in one large crated box, not disassembled |
| Boxed weight | ~200-240 lbs | Affects how many people you need for the move |
| Weight capacity | ~280-300 lbs | Check against the heaviest regular user, not an average |
For a small room, this means an 10×12 ft living room (120 sq ft) can fit the chair, but only if you plan the reclined direction into open floor space, not toward a wall or sofa. A common mistake is measuring the upright footprint, seeing it looks compact, and then discovering the chair needs another 3 feet of clear floor in front of it to fully recline.
Assembly and Moving Realities
The Favor 06 arrives mostly assembled, you’re typically attaching the armrests, headrest, and calf rest rather than building the frame, which takes 20 to 40 minutes with two people. The box itself is the real challenge: at 200+ lbs in a single long crate, it will not fit through a standard 28 inch doorway at some angles, so measure your entry path, hallway turns, and any stairwell landings before ordering, not after it arrives.
On durability, the parts that wear first on SL-track chairs generally are the leg rest extension mechanism (from repeated cycling) and the seat cushion foam, which softens with daily use over a year or two. The frame and roller motor tend to outlast both if the chair is used a few times a day rather than run continuously.
Choosing by Situation
| Your situation | What to prioritize |
|---|---|
| Small apartment, limited floor space | Measure reclined depth first; consider an L-track model like the SS01 if you can’t clear 65+ inches |
| Back pain, need deep recline | Favor 06’s SL-track and 170+ degree zero gravity position are worth the extra footprint |
| Renters, may need to resell or move | Confirm doorway and stairwell width now; boxed weight makes future moves harder to plan last-minute |
| Household with kids and pets | Look for chairs with washable or leather-look upholstery over fabric; airbag valves are the most snag-prone spot for pet claws |
| Shared or multi-user household | Check weight capacity against your heaviest regular user, and confirm the recline memory settings support multiple profiles |
Where the Price Actually Lands
Real Relax massage chair prices generally split into a few tiers: entry L-track models run in the lower range, mid-tier SL-track chairs like the Favor 06 usually land in the $1,200-$1,800 range, and the Deluxe or higher-feature models can push higher depending on added zones and heat coverage. That mid-tier price is buying you the longer roller track and the deeper zero-gravity angle, not extra airbag zones beyond what similarly priced competitors offer, so if your main goal is glute and hip coverage during recline, that’s the upgrade that’s actually worth paying for over an entry-level L-track chair.
