Key takeaways
- Compare the Battery Organiser case by capacity, tester and lid, so loose batteries stay sorted, protected and easy to check before use at home.
Most homes end up with the same problem: a drawer full of loose batteries, some fresh, some half-dead, some so old nobody remembers when they arrived. When a remote stops working or a torch goes dark, the hunt begins, and the battery you grab is often the wrong size or one that died long ago. A storage case with a built-in tester changes that. Instead of guessing, you can see every size at a glance, test a cell before use, and put the dead ones aside for recycling.
This guide is for households that keep a lot of battery-powered gear — remotes, clocks, torches, toys and smoke alarms — and want one tidy place to store it all. It is also for anyone who has ever thrown away a good battery by mistake, or kept a dead one too long. We picked the case below from its Amazon title and specifications: THE BATTERY ORGANISER storage case, model TBO2699, which holds up to 180 batteries and includes a removable tester.
Quick Picks
As an Amazon Associate we earn from qualifying purchases.
| Product | Best for | Key spec from title |
|---|---|---|
| THE BATTERY ORGANISER storage case with tester | Keeping up to 180 household batteries sorted in one place | Holds 78 AA, 64 AAA, 8 9V, 10 C, 8 D and 12 coin-cell batteries |
How to Choose
Match the capacity to the sizes you actually use
The headline figure is 180 batteries, but the split across sizes decides whether this case suits your home. It holds 78 AA, 64 AAA, 8 9V, 10 C, 8 D and 12 flat or coin-cell batteries, so it leans heavily towards the two sizes most households use fastest. Remotes, clocks and toys mostly run on AA and AAA, while C and D cells serve torches. Before buying, count how many of each size you keep. If your stock is mostly AA and AAA with a handful of 9V and coin cells, the layout here lines up well. If you mainly need room for C and D cells, the eight and ten slots for those sizes may feel tight.
Check how the tester works before you buy
A tester is only useful if it is easy to reach and simple, so look closely at how it is built into the case. The tester here is removable, which means you can lift it out and test a battery wherever you are, rather than carrying the whole case to the device. It also needs no battery of its own to work, so there is nothing extra to keep charged or replace. That matters when a remote stops responding and you want a quick answer about whether the cell is dead or the remote itself is at fault. A tester that lives inside the case also stays with the batteries it serves, instead of wandering off into another drawer.
Look at the lid, the layout and the protection
Batteries stored loose can short against each other or pick up damage, so the case around them matters as much as the slots inside. This case has a hinged clear cover with a locking lid, which lets you see what is inside without opening it, while keeping the contents shut and protected when the case is moved or stacked. The layout is double-sided, so batteries sit on both faces of the case rather than in a single deep layer, which keeps each size visible and reachable. Clear walls also make it obvious when a size is running low, so you can restock before the last cell is gone.
Measure the space where the case will live
A storage case only earns its place if it fits where you plan to keep it, so check the dimensions against your drawer, shelf or cupboard before ordering. This case measures 14.22 x 9.3 x 3.62 inches, which is roughly the footprint of a large book, and it is made of gray plastic. That size suits a deep kitchen drawer, a utility shelf or a cupboard, but it may be too wide for a shallow drawer or a crowded junk drawer that already holds other things. Measure the space first, and think about whether you want the case within easy reach or tucked away with other household supplies.
The 1 Best Option
THE BATTERY ORGANISER storage case with tester (model TBO2699)
This case suits a household that wants one home for every spare battery, rather than several small boxes scattered across different rooms. With room for up to 180 cells across six sizes, plus a removable tester that needs no battery of its own, it covers the everyday job of keeping spares sorted and checked. The hinged clear cover with a locking lid keeps everything visible and protected, and the double-sided layout means each size has its own place. It is a straightforward, practical choice for anyone whose drawer of loose batteries has become a small daily frustration.
Specs
- Brand: THE BATTERY ORGANISER
- Model: TBO2699
- Colour: Gray
- Material: Plastic
- Capacity: up to 180 batteries
- Holds 78 AA batteries
- Holds 64 AAA batteries
- Holds 8 9V batteries
- Holds 10 C batteries
- Holds 8 D batteries
- Holds 12 flat / coin-cell batteries
- Removable battery tester included, needs no battery
- Hinged clear cover with locking lid
- Double-sided layout
- Item dimensions: 14.22 x 9.3 x 3.62 inches
- Date first available: June 16, 2025
- Batteries not included
Best for: households that keep spares in many sizes and want one case that also tests them.
Watch out for: batteries are not included, so check your stock of each size first, and measure the space where you plan to keep the case, since it measures 14.22 x 9.3 x 3.62 inches.
Which One Fits Your Situation
Clearing out a crowded junk drawer
If your batteries currently live loose in a drawer, mixed with cables, tape and old keys, this case gives the whole collection a single home. Sort the cells by size into their slots, test each one as you go, and set the dead ones aside for recycling. The clear cover then lets you see what you have without tipping the drawer out again, and the locking lid keeps everything in place when the drawer is opened and closed.
A family home full of remotes and toys
Homes with children tend to burn through AA and AAA batteries faster than any other size, because toys, game controllers and remotes all draw on the same stock. This case is weighted towards those two sizes, with 78 AA and 64 AAA slots, so it matches that pattern well. Keep it on a utility shelf where adults can reach it easily, and the tester makes it simple to check a toy battery before deciding it needs replacing.
Replacing a smaller case you have outgrown
If you already own a small battery box and keep finding spares that do not fit, this case is a step up in capacity without changing how you store things. The six sizes are separated into their own slots on both sides, so nothing is buried under other cells, and the tester ends the guesswork of wondering whether a spare is still good. Move your existing stock across, test each cell as you load it, and recycle anything that fails.
Keeping spares ready for torches and emergencies
For a household that keeps torches, lanterns and radios ready for power cuts, having checked spares on hand matters more than having a large pile of unknown cells. This case holds the C and D cells that larger torches use, alongside the AA and AAA sizes for smaller lights, and the tester lets you confirm each one before an emergency arrives. Store the case somewhere you can find it in the dark, and check the stock after each use.
Common Mistakes
- Buying a case without counting the sizes you actually keep, then finding the AA and AAA slots full while the C and D slots sit empty, or the other way around.
- Mixing dead batteries in with fresh ones in the same slots, which defeats the purpose of a sorted case and means you can grab a dead cell by mistake.
- Forgetting that batteries are not included with this case, and expecting a full set of cells to arrive in the box when it is a storage case only.
- Skipping the measurement step and ordering a case that is wider than the drawer or shelf where it was meant to live, so it ends up balanced on top of other things.
- Storing the case somewhere damp, like under a sink, where moisture can reach the cells and the tester, instead of a dry shelf or drawer.
Frequently Asked Questions
How many batteries does the case hold?
The case holds up to 180 batteries in total, split across six sizes: 78 AA, 64 AAA, 8 9V, 10 C, 8 D and 12 flat or coin-cell batteries. That split is weighted towards AA and AAA, which are the sizes most households use fastest, with smaller numbers of the larger sizes for torches and gadgets.
Does the tester need its own battery to work?
No, the removable tester needs no battery of its own. You can lift it out of the case and test a cell wherever you are, without keeping a spare battery aside just to power the tester. That keeps the routine simple, since the tester is always ready when you need to check a cell before use.
Are batteries included with the case?
No, batteries are not included. The case arrives empty, ready to be filled with the spares you already own, so it is worth counting your stock of each size before you order. If you are short on a particular size, buy those cells separately and load them into the matching slots when they arrive.
Will the case fit in a standard kitchen drawer?
It depends on the drawer, because the case measures 14.22 x 9.3 x 3.62 inches, which is roughly the size of a large book. Measure the inside of your drawer before ordering, and check the depth as well as the width. A deep kitchen drawer or a utility shelf is usually a better home than a shallow drawer.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Collect the home and kitchen items you want in one registry that guests can shop from.
Create a wedding registrySet up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.
Explore Subscribe & SaveFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.
