Small Parts Storage Bins for Garage, Workbench and Craft Room

The best small parts storage bins for most workshops are stackable open-front bins for medium parts and drawer cabinets for tiny hardware, and our top pick is the Akro-Mils AkroBins 30230 12-pack because it is flexible and stackable. The runner-up is the IRIS USA 64-drawer organizer, which handles tiny screws and electronics parts.

This guide covers best small parts storage bins for the garage, workbench, craft room and tackle-style portable cases. It includes a parts organizer comparison, tips for choosing a stackable organizer caddy, and how a tackle box organizer can double as hardware storage. We did not personally use these products; this guide is research-based and draws on listing details, maker specifications and general workshop organization advice.

Top Picks at a Glance

• Best Overall: Akro-Mils AkroBins 30230 12-Pack, a stackable workhorse
• Best Value: CRAFTSMAN 3-Pack 10-Compartment Organizers with latching lids
• Best Budget: Flambeau Tuff Tainer 4007, a portable adjustable box
• Best Premium Cabinet: IRIS USA 64-Drawer Screw Organizer
• Best Wall System: VEVOR 48-Bin Wall-Mounted Parts Rack
• Best Rugged Case: DEWALT 20-Compartment Pro Organizer
• Best Add-On: Akro-Mils 40716 Drawer Dividers 16-Pack

Best Small Parts Storage Bins: Comparison Table

How Many Compartments Do You Need?

Count how many distinct sizes of fastener you own, then add 30 percent for growth. That number is how many compartments you need.

1. Akro-Mils AkroBins 30230, 12-Pack: Best Overall Stackable Parts Bins

• Size: 11 x 5 x 5 inches per bin
• Pack size: 12
• Color: black
• Style: stackable plastic bins with an open front
• Listed for garage, pantry and craft organization

Best for: shelves and workbenches that need open-front bins for screws, craft supplies and pantry items. Skip if: you want a sealed, lidded container.

AkroBins are a long-running format in workshops, classrooms and craft rooms because they solve the problem in the simplest way: a rigid open-front bin that you can grab, stack and slide. The 30230 size is 11 inches long and 5 inches deep and tall, which fits a standard shelf with room to spare and holds items such as washers, wire connectors, beads, buttons and spools.

The stackable design is the real value. Because the bins interlock, you can build a shelf of bins in a corner of the garage and take one down without removing the others. Group them by function: one stack for electrical, one for plumbing, one for fasteners.

The open front means dust will collect, and very small items such as tiny screws can spill if the bin is tipped. Use the 30230 for medium parts and combine with drawer cabinets or lidded organizers for tiny pieces.

In a typical one-car garage, a single six-foot shelf can hold two stacks of twelve bins, which is enough for around 24 categories of medium parts. Keep the heaviest bins, such as those with bolts and anchors, on the lowest tier, and avoid stacking higher than four bins unless the shelf is anchored. If you share the space with children, put sharp items in the back row.

Pros

• 12 bins in a pack
• Stackable and interlocking
• Rigid plastic, easy to relabel
• Fits standard shelves

Cons

• No lid
• Not sized for very tiny parts

2. IRIS USA 64-Drawer Screw Organizer: Best Drawer Cabinet for Tiny Hardware

• Drawers: 64
• Style: small-parts storage cabinet; wall-mountable and stackable per the listing
• Color: black
• Made in USA per the listing

Best for: screws, nails, electronics parts and beads that need separate small drawers. Skip if: you have a lot of large items.

A 64-drawer cabinet is built for people who sort by size and type: M3 screws in one drawer, M4 in the next, then washers, nuts and cotter pins. The IRIS USA model packs those drawers into a compact footprint you can hang on a wall or stack on a bench.

Pull-out drawers keep the dust out, and you can see a label on each front. The trade-off is that each drawer holds only a small amount, so this is for hardware, jewelry findings, electronic components and craft beads rather than for tools.

If you are building a system, label the drawers with a simple grid index (A1, A2) and keep a list on the side of the cabinet. It takes ten minutes and saves hours later.

A practical way to use a drawer cabinet is a two-pass system. First, fill it with the sizes you reach for most, then use the leftover drawers for odds and ends. Wipe the drawers every year or so, because workshop dust and oil build up. The cabinet also suits an electronics bench, where resistors, LEDs and connectors benefit from being kept apart.

Pros

• Many separate compartments
• Drawers keep out dust
• Can be wall-mounted or stacked
• Made in USA per the listing

Cons

• Tiny drawers are not for bulky parts
• Needs labeling to be useful

3. Flambeau Tuff Tainer 4007: Best Portable Small-Parts Box

• Compartments: up to 24
• Dividers: 12 Zerust dividers
• Size: 11 x 7.25 x 1.75 inches
• Translucent plastic

Best for: tackle, jewelry findings, screws and fasteners you carry between jobs. Skip if: you want heavy-duty tool-box construction.

The Tuff Tainer is a tackle box by design, but small parts are small parts. The 4007 has adjustable dividers that create up to 24 compartments in a 1.75-inch-deep case, and the translucent body lets you see what is inside.

The Zerust dividers are listed as part of the design for corrosion protection with metal items. The maker’s claims are worth reading on the product page, but the practical benefit is that metal hooks, screws and fasteners are kept in a case designed for them.

It is a good second box: keep a main cabinet in the workshop and fill one Tuff Tainer for a project, then take it to the job site or a hobby table.

Portable cases are easy to under-use. A good habit is to build a case for each recurring job, such as a bike repair kit, a picture-hanging kit or a sewing kit, and keep it in the same place. When a project ends, return the unused parts to the main cabinet and refill the case. That keeps the system from drifting.

Pros

• Adjustable dividers
• Compact and portable
• Translucent for quick checking

Cons

• Shallow, so not for bulky parts
• Plastic latch is light-duty

4. DEWALT 20-Compartment Pro Organizer: Best for Tough Garage Use

• Compartments: 20
• Model: DWST14830
• Style: small-parts organizer with removable dividers per the family listing
• Dimensions and material: not listed in the title

Best for: trade work and garage projects that need a more rugged organizer. Skip if: you want a decorative organizer.

The DEWALT Pro Organizer is for people who want a hardware box with a bit more toughness than a basic craft organizer. The 20-compartment layout gives separate spaces for different fastener sizes, and the case is sized to sit in a toolbox or on a shelf.

Its main advantage is brand support and availability of matching storage, since DEWALT organizers are designed to stack and fit in related tool-storage systems. Check the maker’s page for latch type, depth and whether dividers are removable.

If you are building a mobile set, one pro organizer for common fasteners and a second for specialty parts is a practical starting kit.

Pro-grade organizers also tend to be compatible with other products from the same line. If you already own tool cases from the maker, stacking them with the organizer saves floor space. Check the case dimensions on the maker page, since this listing does not state them.

Pros

• Rugged brand line
• 20 compartments
• Fits related tool storage

Cons

• Dimensions not listed in the title
• Higher tier than basic organizers

5. VEVOR 48-Bin Wall-Mounted Parts Rack: Best Wall Parts Rack

• Bins: 48
• Style: wall-mounted rack with panels
• Listed for nuts, bolts, screws, nails, beads and buttons
• Material: plastic bins; rack details not listed

Best for: a bare garage wall that you want to turn into a visible parts system. Skip if: you do not want to mount anything on your wall.

A wall rack puts storage at eye level. The VEVOR 48-bin rack organizes small hardware in open bins that you can see at a glance and reach in one motion, which is better than opening ten drawers to find an anchor.

Mount it to studs or use appropriate wall anchors for your wall type, and place it next to your workbench. The rack uses panels, so you can configure the layout; check the maker’s mounting instructions to confirm weight limits.

Because bins are open, treat this as storage for medium items and keep tiny, fragile or sharp items in lidded organizers.

Wall racks reward planning. Before drilling, lay the panels on the floor and arrange the bins to see how many rows you need, then measure where the top row will sit so you can reach it without a ladder. If your wall is masonry, use masonry anchors suited to the wall type and follow the maker’s instructions.

Pros

• Large number of bins
• Frees bench space
• Visible storage

Cons

• Needs mounting
• Open bins collect dust

6. Akro-Mils 40716 Drawer Dividers, 16-Pack: Best Add-On for Drawer Cabinets

• Pack size: 16 dividers
• Material: clear plastic
• Type: width dividers for small drawers in plastic cabinets
• Listed uses: teacher toolbox, small parts, screws

Best for: existing plastic parts cabinets where you want to split drawers into smaller sections. Skip if: you do not own a compatible Akro-Mils cabinet.

Dividers do not look exciting, but they change the capacity of a cabinet more than almost any other purchase. A drawer that holds a jumble of mixed screws can be split into two or three sections, so that each size gets its own space.

The Akro-Mils 40716 is listed for small drawers in plastic cabinets. Confirm that the drawer size and slot design match your cabinet; the listing names Akro-Mils cabinets as the intended use, so other brands may not fit.

If you have already bought a cabinet and are frustrated with mixing, this is the cheapest fix.

Dividers cost little, but fit matters. Measure the inside width of the drawer, check how the divider locks into slots, and test one before you buy for the whole cabinet. If you prefer a no-slot approach, small cardboard or foam inserts can do a similar job, but clear plastic holds its shape better.

Pros

• Clear and low-profile
• 16 pieces
• Increases the sorting power of an existing cabinet

Cons

• Compatibility depends on your cabinet
• Not a storage container by itself

7. CRAFTSMAN 3-Pack 10-Compartment Organizers: Best Starter Set With Latching Lids

• Pack size: 3 organizers
• Compartments: 10 each
• Lid with secure latch
• Model: CMST60964M

Best for: a first parts-storage set for hobby and household repair. Skip if: you need a very large number of compartments.

This set is the simplest way to start sorting small parts. Three latching organizers cover three categories: fasteners, electrical bits and craft supplies. Each lid snaps shut, so the box can be carried without spilling.

Because they are small, they also fit in a drawer or a bag. A set like this suits renters, hobbyists and households that fix things occasionally rather than daily.

As you grow, step up to the drawer cabinets or wall racks above and keep these for portable jobs.

For a household that fixes things rarely, three small organizers are plenty. Fill one with screws and nails, one with picture-hanging hardware and batteries, and one with glue, tape and a small tape measure. Keep them in a hall closet or kitchen drawer so they are always within reach.

Pros

• Latching lids
• Three boxes in a set
• Compact and easy to carry

Cons

• Limited compartments
• Not designed for heavy use

Also Consider

Plano Two-Tray Tackle Box

A classic made-in-USA tackle box with a top-access tray, useful as a small parts box for fishing or workshop hardware.

Shineyaplus 24-Pack Stackable Bins

Small 5 x 4 x 3 inch parts bins in a 24 pack for sorting tiny items on shelves.

Raaco Steel Storage Cabinet, 30-Drawer

A steel cabinet with clear polypropylene drawers for a more durable workshop setup.

Jack Boss 34-Compartment Box

A double-sided clear-lid box with removable dividers for portable hardware sorting.

How We Chose

We chose these picks from listings in our store by comparing stated size, number of compartments, stackability, mounting style and brand reputation, and by reading workshop organization guidance. Each pick fits a different storage style so the roundup is useful whatever your space.

We did not personally use these products. If a measurement or material is not in the listing, we say it is not listed. Check the maker page for dimensions and mounting requirements before ordering.

We limited each brand to two main picks at most, and chose products that cover distinct jobs: stackable bins, drawer cabinets, portable cases, wall racks and add-ons. Compartment counts, pack sizes and dimensions in the comparison table come from the listing titles. Items such as wall weight limits, latch type and drawer depth vary by model and are not listed in every title, so confirm them with the maker. We also left out trading card boxes and similar collectible storage because they answer a different search than workshop and craft parts, and we kept the list focused on parts you would find in a garage, hobby room or repair kit. If a product here is out of stock, use the compartment table above to choose a close substitute by size and mounting style rather than by brand alone.

Buying Guide

Start with how you retrieve parts

If you reach for parts several times a day, open bins or a wall rack are faster than drawers. If you reach for them occasionally, drawers or latching boxes keep dust out. Many workshops use both.

Choose compartment size to match the part

A bin 11 inches long handles spools, conduit fittings and medium fasteners. A drawer 2 to 3 inches wide holds small screws. Anything under 1 inch, such as beads or electronic parts, needs a divided case.

Consider stackability and mounting

Stackable bins save floor space but need a stable shelf. Wall racks use vertical space but need studs or anchors. Cabinets can sit on a bench or hang. Match the system to what your wall and bench can carry, and check weight limits with the maker.

Look at lids, latches and dividers

Latching lids matter if the box moves. Removable dividers give flexibility, and extra dividers, like the Akro-Mils 40716, expand capacity. For metal items, consider corrosion protection options on the maker page.

Label from day one

Use a label maker or a marker and masking tape. Label the front of each bin or drawer with the size or type, and keep a list for large systems.

Durability and Ownership Realities

Plastic organizers wear in predictable places: hinges and latches break first, dividers lose their grip after repeated removal, and drawers can crack if they are overloaded. Look for latches that are part of the lid design rather than glued on, and avoid overfilling drawers with heavy metal parts.

Small parts also create safety concerns. Keep tiny items such as beads, screws and batteries out of reach of young children and pets, and store sharp or chemical items in closed containers. Review the layout once or twice a year, discard broken parts and rebalance the system as your projects change.

Setup Plan for a Garage Wall

1. Mount the wall rack near your bench at chest height.
2. Place drawer cabinets on the bench or on a shelf below.
3. Use stackable bins on a shelf for bulky items.
4. Keep a portable box for each project type.
5. Label everything and review the setup after a month.

Most people over-buy cabinets and under-label them. Aim to buy the first system, use it for four weeks, and then fill the gaps. This keeps spending in line with real needs and avoids the common mistake of buying 100 compartments for 30 types of parts.

Frequently Asked Questions

What are the best storage bins for small parts?

Stackable open-front bins like the Akro-Mils AkroBins are best for medium parts, while multi-drawer cabinets are best for tiny hardware. Choose by part size and how often you reach for them.

What is the best storage for a garage?

A combination of stackable bins, a wall rack and a drawer cabinet works well. Use bins on shelves, the rack on the wall and a cabinet on the bench.

Can a tackle box be used as a parts organizer?

Yes. Tackle boxes have adjustable dividers and compact bodies that suit screws, beads and electronic parts. Check that the latch is secure and the plastic is rigid enough.

What is a stackable organizer caddy?

A stackable organizer caddy is a portable stack of trays or bins, often with a handle, used for craft, office or hardware items. Check the maker’s dimensions for compatibility.

How do I stop screws from mixing?

Use dividers and label each compartment. Do not mix lengths, and return unused screws to their compartment right away.

Are wall-mounted bins strong enough?

They are fine for light fasteners if mounted properly. Use studs or proper anchors and follow the maker’s weight limits.

How should I label parts bins?

Use a short label with the item and size, such as 1-inch wood screws. Put the same label on the shelf or in a list, so you can find items without opening every bin.

Which One Should You Buy?

For one purchase that covers most needs, choose the Akro-Mils AkroBins 30230 pack. If your parts are tiny, add the IRIS USA 64-drawer cabinet. For portable projects, use the Flambeau or the CRAFTSMAN set. To turn a bare wall into storage, pick the VEVOR rack. For a rugged case, choose the DEWALT organizer, and add the Akro-Mils dividers if you already own a compatible cabinet.

Count your parts categories, measure the wall or shelf and label everything on day one.

Sources

• Akro-Mils product information
• IRIS USA product information
• Flambeau Outdoors product information
• DEWALT and CRAFTSMAN product pages
• Workshop and garage organization guides from home improvement publications

Last updated: October 2026